Net Safety探测器TX-M22-A
 
 
 
联系人：吴工
 
 
 
微信：1885 9564 765
 
QQ：2781 499 592
 
邮箱：2781 499 592  qq 
 
 
 
专业做配件一百年，路过看过机会千万不要错过，只要您提供完整的询价信息Net Safety探测器TX-M22-A，我们都可以第一时间给您**满意的价位和货期，也可以配合客户操作各种单子和服务，只有您想不到，没有我们做不到，
 
 
 
鹏鑫（泉州）贸易有限公司专业为各行各业提供进口配件，上有油田进口，下有工业进口配件Net Safety探测器TX-M22-A，中有**新的新能源进口配件，应有尽有，心动就马上拿起电话联系我们吧，期待您的到来！
 
 
 
Net Safety火焰探测器MLP-AR-APM-OP-SEP-SS
 
 
 
　　Net Safety™空气粒子监测仪(APM)是一种用于的红外光学探测器危险的工业应用，以监测环境空气中是否存在微粒来自燃烧产物的物质，例如碳，空气颗粒物或灰分。Net Safety Millennium变送器是一种环保电子产品包装在防爆外壳内。 滚动8个字符显示和状态LED，它提供指令和状态警报。
 
 
 
　　Net Safety APM传感器安装在预计会有空气传播颗粒的地方积累，而Net Safety Millennium变送器便于定位水平。该产品有不锈钢(SS)。可用的型号有：
 
 
 
　　？MLP-AR-APM-OP-SS：APM，4-20 mA模拟输出，带报警和故障继电器，不锈钢钢结构外壳，CSA批准
 
 
 
　　？MLP-AR-APM-OP-SS-X：APM，4-20 mA模拟输出，带报警和故障继电器，不锈钢外壳，CSA，ATEX和IECEx认证
 
 
 
Net Safety火焰探测器MLP-AR-APM-OP-SEP-SS
 
 
 
　　传感器必须直接安装在变送器或单独的接线盒上通过¾-in。 NPT管道入口。 发射器和接线盒都有安装孔，以便根据需要安装到墙壁或杆上。 安装套件硬件是将变送器或接线盒安装到杆上时需要。 联系您当地的Net Safety™代表有关杆安装套件的详细信息。
 
 
 
　　将变送器安装在视线水平，使其易于监控和使用维护目的。 将传感器放置在可能积聚颗粒的位置横跨气流方向，允许颗粒通过光学路径。 为防止水损坏，请在变送器的所有入口处密封导管或接线盒。艾默生建议安装传感器，使气流通过传感器的光路如图2-5所示。
 
 
 
　　净安全APM的工作原理是红外能量被反射出来颗粒物质通过Net Safety APM的光路。 因此，给安装Net Safety APM时要仔细考虑，以确保外部红外线光线未到达传感元件。
 
Net Safety M21 Millennium II Single Channel Transmitter
 
SMART sensor technology, -67 to 185°F temp range, full diagnostics with event and data logging.
 
？
 
Net Safety M2B Millennium II BASIC Universal Transmitter
 
Net Safety M2B Millennium II BASIC Universal Transmitter
 
Delivers highly accurate monitoring of toxic and combustible gases, SMART sensor technology.
 
 
 
Net Safety M22 Millennium II Dual Channel Transmitter
 
Net Safety M22 Millennium II Dual Channel Transmitter
 
Dual channel, SMART sensor technology, -67 to 185°F temp range.
 
 
 
Net Safety SafeGuard Alarm Controller
 
Net Safety SafeGuard Alarm Controller
 
16-channel Modbus Safety System Display and Control.
 
 
 
Net Safety SC311 Infrared Combustible Gas Sensor
 
Net Safety SC311 Infrared Combustible Gas Sensor
 
Millennium II series SMART sensor, Accuracy: ±2% less than 50%, ±5% greater than 50%.
 
 
 
Net Safety CCS-1 Combination Calibration/Rain Shield/Splash Guard Cup
 
Net Safety CCS-1 Combination Calibration/Rain Shield/Splash Guard Cup
 
Combination calibration/rain shield/splash guard cup.
 
 
 
Net Safety Generic Calibration Kit with SS Regulator
 
Net Safety Generic Calibration Kit with SS Regulator
 
Calibration kit with SS regulator for the Millennium M2Basic, M21 and M22.
 
 
 
Net Safety ST3 XChem Toxic Gas Sensors
 
Net Safety ST3 XChem Toxic Gas Sensors
 
SMART sensor technology, 2000ft sensor separation range, field selectable gas ranges.
 
 
 
Net Safety Generic Calibration Kit
 
Net Safety Generic Calibration Kit
 
Generic Calibration Kit for the Millennium M2Basic, M21 and M22.
 
 
 
Net Safety ** Series Junction Box
 
Net Safety ** Series Junction Box
 
Termination box for flame detectors or for remote mounting gas sensors from transmitters.
 
 
 
Net Safety SC310 Catalytic Bead Combustible Gas Sensor
 
Net Safety SC310 Catalytic Bead Combustible Gas Sensor
 
Millennium II series SMART sensor, Accuracy: ±2% less than 50%, ±5% greater than 50%.
 
 
 
Net Safety IPF-001 IP 66/67 Filter
 
Net Safety IPF-001 IP 66/67 Filter
 
IP 66/67 Filter for SX3 Series sensors.
 
 
 
Net Safety CAL-CYL Calibration Gas Cylinders
 
Net Safety CAL-CYL Calibration Gas Cylinders
 
Calibration Gas Cylinders for the Basic M2B, M21 and M22 Transmitters.
 
 
 
Net Safety SSK Sun Shade Kit
 
Net Safety SSK Sun Shade Kit
 
Pipe Mounted Sun shade kit/rain guard - stainless steel.
 
 
 
Net Safety CC-INLINE Calibration Adapter
 
Net Safety CC-INLINE Calibration Adapter
 
In-Line Cup Adaptor for gas sensors.
 
 
 
Net Safety Universal Duct Mount Assembly
 
Net Safety Universal Duct Mount Assembly
 
Stainless steel universal duct mount assembly, 1M or 1.5M sampling pipe.
 
 
 
Net Safety TX-M21 Replacement Transmitter
 
Net Safety TX-M21 Replacement Transmitter
 
Replacement single channel transmitter for the M21 series, electronics only (enclosure not included).
 
 
 
Net Safety Gas Sensor/Flame Detector Pipe Mounting Kits
 
Net Safety Gas Sensor/Flame Detector Pipe Mounting Kits
 
Pipe mounting kit - gas detectors and flame detectors (stainless steel).
 
 
 
Net Safety ST Replacement Sensors
 
Net Safety ST Replacement Sensors
 
Hydrogen sulfide, oxygen, or carbon monoxide replacement sensors.
 
 
 
Net Safety SG10-0208 Rack
 
Net Safety SG10-0208 Rack
 
19 inch rack that supports 1 or 2 SGX-SM controllers.
 
 
 
Net Safety TX-M22 Dual Transmitter
 
Net Safety TX-M22 Dual Transmitter
 
TX-M22 Dual Transmitter replacement, electronics only (enclosure not included).
 
 
 
Net Safety SG10-0158 Input Board
 
Net Safety SG10-0158 Input Board
 
8 channel analog (4-20mA) input board with terminals.
 
 
 
Net Safety 8 Channel Output Board
 
Net Safety 8 Channel Output Board
 
8 channel output board, analog (4-20mA) or discrete relay (** form C).
 
 
 
Net Safety Universal Input Power Supply 
 
Net Safety Universal Input Power Supply
 
85-240VAC universal input 150W 24VDC power supply.
 
 
 
Net Safety NEMA 4X Expansion Plate
 
Net Safety NEMA 4X Expansion Plate
 
NEMA 4X expansion plate (adds up to 4 option positions).
 
 
 
Net Safety SSK-2 Sun Shade Kit
 
Net Safety SSK-2 Sun Shade Kit
 
Sun shade kit for MLP & ML2 detectors - stainless steel - Requires UN-MK-1.
 
 
 
 
 
 
 
Net Safety探测器TX-M22-A