Chain plate conveying belt for producing customized stainless steel material high-temperature resistant forging piece chain plat
Our company has newly developed a silent high-speed chain conveyor. The chain plate conveyor belt adopts 16A hollow chain, the thickness of the chain plate is 2.5mm, the stainless steel material is used, the outer diameter of the imported bearing is 32mm, the inner hole is 15mm, the 6202rz bearing, the crx bearing, Because the bearing friction coefficient is small, power saving and energy saving, silent, strong, the support shaft adopts 15 mm, 40 × 80 track, because the bearing can rotate and the bearing steel is wear-resistant, it has achieved the goal of fast silence, so it needs high speed to strike while the iron is hot. The speed can reach 2 meters per second.
1, high temperature resistance, transport 1250 degrees of high temperature metal parts no problem. Do not deform, heat resistance is strong.
2, high speed, 1: 2 meters per second operation and transportation speed. A few seconds from the nose to the nose, just a few seconds.
3, silent, silent. The chain plate conveyor belt uses bearing rolling to realize the operation of chain plate conveyor belt, the friction coefficient between bearing and transportation track is small, so silent mute. The friction coefficient is greatly reduced by bearing rolling transportation, and it is very easy to run.
4, energy saving, now is not chain sliding friction, but bearing rolling friction for transportation. The conveyor belt does not need to use too much effort to run at high speed, the motor will save effort. At the same speed, the motor power of this kind of bearing chain plate conveyor is twice as small.
5, it is convenient to replace parts. If the chain plate conveyor belt is more than the number of years, the bearing is broken, open the opening pin to replace a bearing, simple and convenient.
6, the reason for the high speed silence of bearing chain plate conveyor is the reason of bearing. There is also one reason for the long life of the silent bearing sprocket conveyor. The outer diameter of the conveyor sprocket is larger than the upper and lower distance of the conveyorundefineds conveying track. After turning, the bearing of the conveyor sprocket is gradually in contact with the track, not a violent impact track. This greatly reduces the wear and tear of bearings.
7.Another key to reducing noise is to oil and refuel chains and bearings every day.
8. If the speed of the conveyor needs to be increased. Then change and narrow the outer diameter of the drive sprocket above the active shaft. By halving the number of teeth of the sprocket driving the motor chain on the active shaft, the speed will double. The induction motor can adjust the speed and speed. The variable frequency motor can adjust the speed and speed.
9, the silent high-speed chain board conveyor has the high speed of the chain conveyor, but also has the stability of the chain plate conveyor, but also has the seamless non-stuck material of the chain plate.
10. The chains on both sides of the high-speed silent chain conveyor are hollow chains of Donghua. It is a whole chain, and its service life is much longer than that of ordinary chain. Imported bearings are used.
11, the cost of silent tooth chain conveyor is lower than what we have developed. The bearing chain conveyor injected the painstaking efforts of everyone in our company. We are willing to contribute our professional knowledge and warm service to the forging industry.
The hot forging conveyor developed by our company is: bearing chain plate conveyor, close chain plate conveyor, flat chain plate conveyor, precision roller chain conveyor, silent tooth chain conveyor, drum conveyor, chain rod conveyor, The Great Wall net belt conveyor, the chain net conveyor, the net belt transportation machinery.
Order forging and forging conveying machinery, conveyor belt, transport belt, transmission machinery, required data
1, length, width, height and speed 2, weight of conveying parts
3, shape and size of parts.