产品详情
高接枝率15%-18%马来酸酐接枝相容剂PS-35
价格
¥35.00
订货量
≥25
供货总量
255555千克
产地
德国
发货期
自买家付款之日起2天内发货

东莞市樟木头恒泰塑胶原料经营部

百销通高级版 身份认证

马来酸酐接枝PS(PS-35)产品说明 
The Introduction Of MAH-PS(PS-35)

特 性: 本品为马来酸酐接枝的PS共混物,外观:淡黄色颗粒,接枝率:15-18%,熔融指数:(200℃,5Kg):1.0-3.0g/10min。该产品具有接枝率高,接枝完全,无毒、无味的特点,克服了马来酸酐接枝物浓烈的气味。 
Property: The product is the mixture that MAH was grafted onto PS. Appearance: light yellow particle; Grafting ratio: 15-18%; MFR(200℃,5Kg):1.0-3.0g/10min. The product is of high grafting ratio, grafting thoroughly, no poison, no smell. Overcoming the strong thick which made by MAH was grafted onto the resin.. 

用 途: 
1.可作为玻纤增强ABSAS矿物填充ABS界面改性剂。马来酸酐接枝PS赋予了ABS极性,只要添加少量的马来酸酐接枝PS就可以大幅度提高ABS、AS与玻纤的结合力,使增强ABS、增强AS的拉伸强度、弯曲强度等明显提高。 
2.可作为尼龙与ABS,PC与ABS共混合金的相容剂。 
Usage: 
1. Used as interface modifier in glass-fiber strengthening ABS, AS and filling ABS. ABS can be given polarity if MAH was grafted onto it. Adding a little PS-35 can improve widely the adhesive between ABS and AS, strengthen ABS, tensile strength and tension strength of AS and so on.
2. Used as compatibilizer in blending alloy of nylon and ABS, PC and ABS .

表一(Figure 1)ABS树脂玻纤增强典型数据(Typical data of ABS/GF)

性能(Performance)

   位(Unit)

ABS+GF30%

ABS+GF30%+3%(PS-35)

拉伸强度(Tensile strength)

MPa

70

120

弯曲强度(Flexural strength)

MPa

100

143

悬臂梁冲击强度 
(Izod notched impact strength)

KJ/m2

4

10




       表二(Figure 2)PA6/ABS合金典型数据(Typical data of PA6/ABS alloy)
 

性能(Performance)

单位(Unit)

PA6+ABS20%

PA6+ABS15%+5%(PS-35)

拉伸强度(Tensile strength)

MPa

46

51

弯曲强度(Flexural strength)

MPa

65

72

悬臂梁冲击强度 
(Izod notched impact strength)

KJ/m2

6

9

注:上述数据为实验典型值,真实可靠。仅供参考,不作为正式质保承诺。 
Notice: Above data is experiment typical, true and reliable .It isn’t commitment of the quantity guarantee, but reference

使用方法:按比例与ABS、PC、PA等树脂混合造粒。 
包装及储运:25Kg牛皮纸袋内衬塑料袋装,按非危险品,在干燥条件下储运,避日光、雨淋。 

Packing, storage and transportation:Packed in 25Kg cow parchment takes with plastic takes inside. Not dangerous goods. Store and transport it at dry circumstance. Avoid sunlight and rain.

PS马来酸杆接枝级PS-35 粒子15.jpgPS马来酸杆接枝级PS-35 粒子14.jpg

温馨提示:
因塑胶行情每天都会有变更,页面上有些报价可能会与当天实际报价有所差异,仅供参考!如需了解新价格行情,请直接来电话询价,谢谢!

请咨询热线:0769-89875286
电话:叶先生13728390432微信同号

公司:东莞市胜浩塑胶原料有限公司(东莞市恒泰塑胶原料经营部)
地址:东莞市樟木头镇先威大道塑胶商务中心7栋56号

阻燃PET粉纤维级PET 注塑聚酯 FR530汽车部件 家电部件PET塑胶料98670305阻燃PET粉纤维级PET 注塑聚酯 FR530汽车部件 家电部件PET塑胶料98670295

猜你喜欢 您还可以搜索
店铺 立即洽谈 发联系信 拨打电话
首页 > 化工 > 塑料及其制品 > 工程塑料 > 高接枝率15%-18%马来酸酐接枝相容剂PS-35
朋友圈二位码

长按二维码,保存至相册。
发送给微信好友。