工业用烙铁头，烙铁咀。烙铁头具有以下特点： 
 
A． 材质采用无氧铜为原材料，外型加工尺寸  。
 
 B． 电度上采用先近的钠米技术，具有  的防腐，防氧化性，使烙铁头的寿命超长。
 
 C． 上锡性能稳定，焊后的焊点圆滑，均匀。
 
 D．烙铁头表层采用特属材料处理，高强度的镍铁合金确保烙铁表面不因高温变黑。
 
 E． 深镀能力和均镀能力的  结合。
 
具体选型请参考以下图片或来电咨询：
 
 
 
请根据您的线路板上焊点的大小，选择以下适合您的烙铁头 
 
烙铁头采用进口无氧铜做为原材料，储热量大 导热迅速，不易产生虚焊。本体寿命长不易老化。
 
外型使用特殊成型机器加工，尺寸  ，不会因为焊点过大导致虚焊；或者烙铁头较大碰到周边元件。
 
无铅合金铁电镀层密实，不易脱落 ，使用寿命特长；
 
产品表层使用特殊材料处理，  镀锡处理，确  体不因高温而变黑。
 
 正常使用350度焊接，寿命约30000-35000焊点。具体会根据焊点大小，烙铁头温度，锡线成分含量不一样，寿命略有不同。
 
注意请勿使用砂纸或者锉加工前端。正常清洁请使用无水烙铁海绵或者清洁球。勿在桌子上敲打。
 
注意无焊接工作时，请关闭焊台或者调低温度，以延长烙铁头使用寿命。
 
 
 
According to the size of the solder joints on your circuit board, plea     lect the following solder tips suitable for you
 
 
 
The iron head adopts imported oxygen free copper as the raw material, which has large heat storage and rapid heat conduction,.
 
 
 
The shape is processed by special molding machine, with accurate size, which will not lead to faulty welding due to too large solder joints; or the soldering iron head is large enough to touch the surrounding components.
 
 
 
T     ad-free alloy ferroelectric coating is dense, not easy to fall off, and has a long service life;
 
 
 
The surface of the product is treated with special materials and the tip is tinned to ensure that the body is not blackened due to high temperature.
 
 
 
 
 
 
 
The normal use is 350 degree welding,, the temperature of the iron head and the content of the tin line, the service life is slightly different.
 
 
 
't knock on the table.
 
 
 
Note that when there is no welding work, please close the welding table or lower the temperature to extend the service life of the iron head.