压软管概述：  压软管采用德国产的水星软管。该软管的工作压力最高可达3200bar,其增强层是经过特别处理的高强度钢丝缠绕层，内胶层是聚甲醛(POM)或聚酰胺(PA),外胶层相应是聚酰胺(PA)或聚亚安酯(PUR)。这种软管流体阻力小，容积膨胀小，防化学腐蚀性好，重量轻，外径小，单根长度可达1200M。软管接头用  碳素钢或不锈钢制造，采用  的扣压设备和工艺。高压橡胶管是新加坡产的AN-FLEX软管。该软管的工作压力最高可达1400bar。软管型号内径(mm)外径(mm)工作压力(bar)最小爆破压力(bar)最小弯曲半径(mm)接头内径(mm)重量(kg/m)3/23.46.91,0002,500602.00.0724/24.08.01,2003,000752.50.1105/25.09.41,0402,600953.0mm/3.5mm*0.1255/35.010.31,1202,800953.0mm/3.5mm*0.2186/26.311.51,0002,5001104.00.1756/2L6.212.28802,200804.00.2066/36.312.31,0402,6001104.00.2808/28.113.38402,1001305.50.2008/2L8.013.67201,8001005.50.24010/210.115.56901,7251606.50.28013/212.919.36401,6002008.50.43520/219.026.25201,30024014.00.75025/223.631.04401,10030017.50.8505/20K5.010.81,0402,600953.00.220